AN engineer is implementing an import operation in Cisco UCS Manager. What is the impact of performing this operation?

A.

A configuration can be imported from a higher release to a lower release.

B.

Information can be modified on the management plane only.

C.

Only a configuration file that was exported from the same Cisco UCS Manager can be imported.

D.

An import operation can be scheduled.

An engineer is asked to manage a large-scale data center and collect information from multiple Cisco NX-OS
devices using Cisco NX-OS Data Management Engine model. Which technology should be used to accomplish this goal?

A.

NX-API REST

B.

NETCONF

C.

JSON-RPC

D.

NX Yang

AN engineer enters these commands while in EEM on a Cisco Nexus 9000 Series Switch.
event manager applet Backup-config
event timer watchdog time 1800 name timer
event cli match “copy running-config startup-config”
what is the result of applying this configuration?

A.

It saves the running configuration every 1800 seconds.

B.

It generates an error because no action is mentioned.

C.

It executes the copy running-config startup-config command.

D.

It blocks the copy running-config startup-config command.

The engineer must configure SPAN on a cisco Nexus 5000 Series switch to get a capture of the traffic from these applications for an in-depth packet analysis. Which two characteristics must be considered? (Choose two.)

A.

The Ethernet, FC, vFC, port channel, SAN port channel can be used as SPAN source ports.

B.

The rx/tx option is available for VLAN or VSAN SPAN sessions.

C.

SPAN source port can be monitored in multiple SPAN sessions.

D.

Only Ethernet, FC, vFC, port channel port types can be a destination SPAN port.

E.

A SPAN source port cannot be a destination SPAN port

An engineer is seeking the most optimal on demand CPU performance while configuring the BIOS settings of UCS C-series rack mount server.

A.

C0/C1 state

B.

C6 Retention

C.

C2 state

D.

C6 non-Retention

Host 1 is in VLAN 100 located is DataCenter 1 and Host2 is in VLAN200 located in DataCenter2. Which OTV VLAN mapping configuration allows Layer 2 connectivity between these two hosts?

A.

Option A

B.

Option B

C.

Option C

D.

Option D

Refer to the exhibit. 

What is a characteristic of the UUID in the service profile presented.

A.

based on the hardware

B.

vendor assigned

C.

unique system generated

D.

allocated from a UUID pool

In an FCoE environment, for which two sets of data must an interface that implements the PAUSE mechanism always provision sufficient ingress buffer? (Choose two)

A.

frames that were sent with high credit

B.

frames that were processed and transmitted by the transmitter before the PAUSE frame left the sender

C.

frames that were sent on the link but not yet received.

D.

frames that were sent on the link and received.

E.

frames that were processed and transmitted by the transmitter after the PAUSE frame left the sender.

What is an advantage of steaming telemetry over SNMP?

A.

MD-5based authentication on polling

B.

periodic polling of the device status

C.

periodic push-based subscription messages

D.

on-change traps sent to a receiver

Refer to the exhibit.

Which backup operation type does not include the Preserve Identities feature?

A.

logical configuration

B.

system configuration

C.

full state

D.

all configuration

What is the benefit of adding Cisco HyperFlex Hardware Acceleration Cards to a HyperFlex deployment?

A.

offline encryption acceleration

B.

increased network throughput

C.

GPU acceleration

D.

Increased compression efficiency

Which action must be performed before renumbering a Cisco UCS chassis?

A.

Move the chassis to new ports on fibric interconnect.

B.

Re-acknowledge the chassis.

C.

Decommission the chassis.

D.

Run the shut and no shut command on the connected ports.