Refer to the exhibit.

Why does the python code for Cisco NX-API print error message?

A.

The “type” is wrong in the header of the request and should be “cli_ conf”.

B.

NX-API does not allow configuration for features via the requests module.

C.

The “type” is wrong is the body of the request and should be “cli_ conf”.

D.

The JSON is not a supported format for the NX-API

Refer to the exhibit.

Which statement about the default gateway configuration of the vPC is true?

A.

N7K-1 acts as the default gateway for all traffic.

B.

N7K-2 forwards traffic that is destined for the default gateway by using the peer link.

C.

N7K-2 acts as the default gateway for all traffic.

D.

Either switch can act as the active default gateway.

Drag and drop the characteristics from the left onto the correct storage systems on the right.

A storage engineer must configure zoning on a Cisco MDS 9000 Series switch. Drag and drop actions from the left into the order on right

A host EDG Client wants to talk to a webserver in EGP Web. A contract with default settings is defined between EPG Client and EPG Web, which allows TCP communication initiated by the client toward the webserver with TCP destination port 80. Which statement is true?

A.

The host in EPG Client can connect to TCP destination port 80 on the webserver in EPG Web. The webserver will not be able to initiate a separate TCP connection to a host port with TCP source port 80.

B.

If EPG Web is made a preferred group member, a contract between EPG Client and EPG Web is no longer required for the host is EPG Client and EPG Web is no longer required for the host in EPG Client to reach the webserver in EPG Web.

C.

The host in EPG Client Can connect to TCP destination port 80 on the webserver in EGP Web. The webserver can initiate a separate TCP connection to a host port with TCP source port 80

D.

If vzAny is configured to consume and provide a “deny all” contract, traffic between EPG Client and EPG Web is no longer allowed.

Port security is statically configured on a Cisco Nexus 7700 Series switch and F3 line card. The switch is configured with an Advanced Services license. Which two actions delete secured MAC addresses from the interface? (Choose Two)

A.

The address must be removed from the configuration.

B.

The address must reach the age limit that is configured for the interface.

C.

The interface must be converted to a routed port.

D.

The device must be restarted manually.

E.

Shutdown and then no shutdown must be run on the interface.

Which two components are used by the Cisco Nexus switches telemetry process? (Choose two)

A.

data encoding

B.

data manipulation

C.

telemetry agent

D.

telemetry compression

E.

data collection

An engineer is implementing NPV mode on a Cisco MDS 9000 Series Switch. Which action must be taken?

A.

The FCNS database must be disabled in the fabric.

B.

A port channel must be configured to the upstream switch.

C.

All switches in the fabric must be Cisco MDS switches.

D.

NPIV must be enabled on the upstream switch.

An engineer needs to install a new package on a Cisco Nexus 9000 Series Switch. What is the impact of running the install commit <filename> command on the switch?

A.

The switch is restarted after the upgrade is complete.

B.

The package is used after the switch is restarted

C.

The package is used in the running configuration.

D.

The previous package that was in use is deleted from bootflash.

Where is the witness deployed in a two-node Cisco HyperFlex Edge deployment?

A.

to the HyperFlex Edge two-node cluster

B.

to an additional server with network access to HyperFlex Edge

C.

to a third-party cloud provider

D.

to Cisco Intersight

Which method must a network engineer use to upgrade the BIOS firmware of a Cisco UCS standalone C-Series reck-mount server?

A.

Use the Cisco host upgrade utility.

B.

Use the Cisco hardware upgrade utility.

C.

Use the Cisco host firmware policy.

D.

Use the U-ACPI Interface.

An engineer implements SPAN configuration on an Nexus 5000 series switch. Which two commands are necessary to complete the SPAN session configuration? (Choose two)

A.

Configure the switchport monitor under interface fc2/2

B.

Configure the switchport mode SD under interface tc2/1.

C.

Configure switchport speed 4000 under interface fc2/2.

D.

Configure session type fc under monitor session 1.

E.

Configure the switchport mode SD under interface fc2/2.