An engineer must configure Linux hosts that are deployed on Cisco UCS B-Series Servers
to boot from SAN. The SAN boot policy is configured in Cisco UCS Manager, and the boot
order is verified to be set as expected However, the Linux hosts fail to boot. Which action
resolves the issue?

A.

Remove all of the local storage that is installed

B.

Delete and reconfigure the pWWN of the SAN boot target

C.

Remove all of the ISO images that are mounted as a virtual CD-ROM

D.

Delete and reconfigure the boot LUN

Refer to the exhibit.

A switch is being downgraded to an earlier release because of a problem with the current
release. After the switch is downgraded, it can no longer forward traffic. Which action
resolves the issue?

A.

Enable ISSD after the downgrade is complete.

B.

Roll back to the original image.

C.

Reload the switch.

D.

Shut and no shut the interfaces to the FEX.

Refer to the exhibit

The vPC between switch1 and switch2 does not work. Which two actions resolve the
problem? (Choose two.)

A.

Configure the IP address on the interface.

B.

Activate VLANs on the vPC.

C.

Configure one of the switches as primary for the vPC.

D.

Correct the configuration of the vPC peer link and the vPC peer keepalive.

E.

Match the vPC domain ID between the two devices.

The external routes fail to propagate to leaf switches in Cisco ACI fabric Which two actions
resolve the issue? (Choose two.)

A.

Enable the VTEP pool in the fabric

B.

Assign an MP-BGP AS number to the fabric.

C.

Specify the spine nodes as route reflectors

D.

Associate the correct contract to the L30ut.

E.

Configure an MP-BGP area.

Refer to the exhibit.

The initiator that has FC ID 0x970102 fails to communicate with the target that has FC ID
0x970200. What action resolves the issue?

A.

Reconfigure the initiator and the target to be in the same zones

B.

Reactivate the zoneset.

C.

Reset the port for FC ID 0x970102 and FC ID 0x970200 to log in to the fabric.

D.

Reset the port for FC ID 0x970209 and FC ID 0x9700c2 to log in to the fabric.

Refer to the exhibit.

Partial configuration from N9K-1 and N9K-2 is included. The client has two WANs
connected.
WAN-1 is for normal business-day activities.
WAN-2 is for server backups during nonworking hours of 1:00 a.m. to 5:00 a.m.
daily.
The client says that at the scheduled time for backup, the data center server failed to use
the WAN-2 link to back up the servers to the cloud backup system. What is the solution to
this problem?

A.

The event timer must be written in epoch time format.

B.

The Cisco Nexus switch must be configured with one applet because a configuration
with two applets will fail.

C.

The Cron entry must be configured without double quotes.

D.

The applet called “Backup” must include an action to remove the current static rout

An engineer troubleshoots a VXLAN EVPN data center. The applications in the data center
fail to reach the DNS server that is located at IP 10.10.10.10. The engineer examines the
BGP EVPN routing table and notes that the IP prefix route covers the DNS server is
missing. Which action resolve the issue?

A.

Set the IP prefix route to represent [5]:[0]:[0]:[32]:[10.10.10.10]/224 in the routing table.

B.

Configure an IP ARP entry to represent
[2]:[0]:[0]:[48]:[0050.569f.1285]:[32]:[10.10.10.10]/272 in the routing table

C.

Set the IP prefix route to represent [2]:[0]:[0]:[48]:[0050.569f.1285]:[0]:[0.0.0.0]/216 in the
routing table

D.

Configure an IP ARP entry to represent
[4]:[0300.0000.00fc.bd00.0309l[32]:[10.10.10.10]/136,n the routing table

An IOM fails during a firmware upgrade and is unresponsive. Which action recovers the
module?

A.

Restore UCSM configuration from backup.

B.

Roll back to the previous firmware.

C.

Use AutoInstall to reinstall the firmware.

D.

From the peer IOM, reset the faulty module.

Refer to the exhibit.

A network engineer configures an EEM script to get a syslog notification after a
configuration change. This message appears when the engineer must make a new
configuration to this switch. Which configuration did the engineer neglect to apply in the
script for it to function properly?

A.

event cli match ‘configure terminal’

B.

event policy-default count 1 time 100

C.

event syslog occurs 10

D.

action 2.0 event-default

Refer to the exhibit

An upgrade operation fails with an error displayed. Which action resolve the issue?

A.

Use a different system image

B.

Use a different kickstart image

C.

Allocate extra space on a flash drive to extract a kickstart image

D.

Allocate extra space on a flash drive to extract a system image

Drag and drop the Cisco UCS SNMP fault types from the left onto the correct issues on the
right.

A fabric interconnect fails to start and the console displays the loader prompt. Which two
actions resolve the issue? (Choose two.)

A.

Load an uncorrupt bootloader image.

B.

Load an uncorrupt kickstart image.

C.

Reconnect L1/L2 cables between the Fis.

D.

Reformat the fabric interconnect.

E.

Load the correct version of the boot image.