Which device should be configured with the service chain IP address to route intersite traffic through a firewall?
A.
vSmart
B.
firewall
C.
spoke WAN Edge
D.
hub WAREdge
vSmart
Which value is verified in the certificates to confirm the identity of the physical WAN Edge device?
A.
Serial Number
B.
OTP
C.
System-IP
D.
Chassis-ID
Serial Number
https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/sdwanxe-gs-book/manage-certificates.html
Which secure connection should be used to access the REST APIs through the Cisco vManage web server?
A.
HTTP inspector interface
B.
authenticated HTTPS
C.
authenticated DTLS
D.
JSON Inspector interface
authenticated HTTPS
https://documenter.getpostman.com/view/3224967/SVmpXhXd#ed9ccd34-cc5a-4258-bb6b-9b3848b7f650
Which routing protocol has the highest default administrative distance?
A.
OMP
B.
external EIGRP
C.
IS-IS
D.
IBGP
OMP
Which configuration changes the packet loss priority from low to highly?
A.
Option A
B.
Option B
C.
Option C
D.
Option D
Option B
https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/qos/vEdge-20-x/qosbook/forwarding-qos.html
Which platform cannot provide IPS and URL filtering capabilities?
A.
Cisco CSR 1000V
B.
Cisco ISR 1000
C.
Cisco Catalyst 8300
D.
Cisco ISR 4000
Cisco ISR 1000
An engineer must create a QoS policy by creating a class map and assigning it to the LLQ queue on a WAN Edge router Which configuration accomplishes the task?
A.
Option A
B.
Option B
C.
Option C
D.
Option D
Option D
Which platforms are managed by a single vManage dashboard?
A.
ISR4351, ASR1002HX, vEdge2000, vEdge Cloud
B.
ISR4321, ASR1001, Nexus, ENCS
C.
ISR4321, ASR1001, ENCS, ISRv
D.
ISR4351, ASR1009, vEdge2000, CSR1000v
ISR4321, ASR1001, ENCS, ISRv
https://www.cisco.com/c/dam/en/us/solutions/collateral/enterprise-networks/sdwan/nb-06-sw-defined-wan-faq-cte-en.pdf
Which destination UDP port is used by WAN Edge router to make a DTLS connection with vBond Orchestrator?
A.
12343
B.
12345
C.
12346
D.
12347
12346
A company deploys a Cisco SD-WAN solution but has an unstable Internet connection. When the link to vSmart comes back up, the WAN Edge router routing table is not refreshed, and some traffic to the destination network is dropped. The headquarters is the hub site, and it continuously adds new sites to the SD-WAN network. An engineer must configure route refresh between WAN Edge and vSmart within 2 minutes. Which configuration meets this requirement?
A.
Option A
B.
Option B
C.
Option C
D.
Option D
Option A
Drag and drop the steps from the left into the sequence on the right for a WAN Edge router after powering on for zero touch provisioning.
Which two metrics must a cloud Edge router use to pick the optimal path for a SaaS application reachable via a gateway site? (Choose two.)
A.
HTTP loss and latency metrics to the SaaS application
B.
ICMP loss and latency metrics to the SaaS application
C.
BFD loss and latency metrics to the gateway site
D.
BFD loss and latency metrics to the SaaS application
E.
HTTP loss and latency metrics to the gateway site
HTTP loss and latency metrics to the SaaS application
BFD loss and latency metrics to the gateway site
The gateway vEdge uses HTTP to obtain SaaS application performance information - The client vEdge will use BFD over the IPSec tunnel to the gateway site to obtain client>gateway path performance information
https://www.cisco.com/c/dam/en/us/td/docs/solutions/CVD/SDWAN/CVD-SD-WAN-CloudonRamp-for-SaaS-Deployment-Guide-2018JUL.pdf
| Page 6 out of 30 Pages |
| Previous |