Refer to the exhibit.

An engineer is monitoring reachability of the configured default routes to ISP1 and ISP2. The default route from ISP1 is preferred if available. How is this issue resolved?

A.

Use the icmp-echo command to track both default routes

B.

Use the same AD for both default routes

C.

Start IP SLA by matching numbers for track and ip sla commands

D.

Start IP SLA by defining frequency and scheduling it

An engineer configured a company’s multiple area OSPF head office router and Site A cisco routers with VRF lite. Each site router is connected to a PE router of an MPLS backbone.

After finishing both site router configurations, none of the LSA 3,4 5, and 7 are installed at Site A router. Which configuration resolves this issue?

A.

configure capability vrf-lite on Site A and its connected PE router under router ospf 1 vrf abc

B.

configure capability vrf-lite on Head Office and its connected PE router under router ospf 1 vrf abc

C.

configure capability vrf-lite on both PE routers connected to Head Office and Site A routers under routtr ospf 1 vrf abc

D.

configure capability vrf-lite on Head Office and Site A routers under router ospf 1 vrf abc

Drag and Drop the IPv6 First-Hop Security features from the left onto the definitions on the right.

Refer to the exhibit.

An engineer is trying to redistribute OSPF to BGP, but not all of the routes are redistributed. What is the reason for this issue?

A.

By default, only internal routes and external type 1 routes are redistributed into BGP

B.

Only classful networks are redistributed from OSPF to BGP

C.

BGP convergence is slow, so the route will eventually be present in the BGP table

D.

By default, only internal OSPF routes are redistributed into BGP

Refer to the exhibit.

An administrator that is connected to the console does not see debug messages when remote users log in. Which action ensures that debug messages are displayed for remote logins?

A.

Enter the transport input ssh configuration command.

B.

Enter the terminal monitor exec command.

C.

Enter the logging console debugging configuration command.

D.

Enter the aaa new-model configuration command.

Refer to the exhibit.

Why is user authentication being rejected?

A.

The TACACS+ server expects “user”, but the NT client sends “domain/user”.

B.

The TACACS+ server refuses the user because the user is set up for CHAP.

C.

The TACACS+ server is down, and the user is in the local database.

D.

The TACACS+ server is down, and the user is not in the local database.

Refer to the exhibit.

The server for the finance department is not reachable consistently on the 200.30.40.0/24 network and after every second month it gets a new IP address. Which two actions must be taken to resolve this Issue? (Choose two.)

A.

Configure the server to use DHCP on the network with default gateway 200 30.40.100.

B.

Configure the server with a static IP address and default gateway.

C.

Configure the router to exclude a server IP address.

D.

Configure the server to use DHCP on the network with default gateway 200 30.30.100.

E.

Configure the router to exclude a server IP address and default gateway.

Refer the exhibit.

Which action resolves intermittent connectivity observed with the SNMP trap packets?

A.

Decrease the committed burst Size of the mgmt class map

B.

Increase the CIR of the mgmt class map

C.

Add a new class map to match TCP traffic

D.

Add one new entry in the ACL 120 to permit the UDP port 161

Refer to the exhibit.

Which interface configuration must be configured on the spoke A router to enable a dynamic DMVPN tunnel with the spoke B router?

A.

Option A

B.

Option B

C.

Option C

D.

Option D

Refer to the exhibit.

An IP SLA is configured to use the backup default route when the primary is down, but it is not working as desired. Which command fixes the issue?

A.

R1(config)# ip route 0.0.0.0.0.0.0.0.2.2.2.2 10 track 1

B.

R1(config)# ip route 0.0.0.0.0.0.0.0.2.2.2.2

C.

R1(config)#ip sla track 1

D.

R1(config)# ip route 0.0.0.0.0.0.0.0.1.1.1.1 track 1

Refer to the exhibit.

What does the imp-null tag represent in the MPLS VPN cloud?

A.

Pop the label

B.

Impose the label

C.

Include the EXP bit

D.

Exclude the EXP bit

Which protocol does VRF-Lite support?

A.

IS-IS

B.

ODR

C.

EIGRP

D.

IGRP