Topic 2, Exam B
An engineer configures interface Gi1/0 on the company PE router to connect to an ISP Neighbor discovery is disabled
Which action is necessary to complete the configuration if the ISP uses third-party network devices?
A.
Enable LLDP globally
B.
Disable autonegotiation
C.
Disable Cisco Discovery Protocol on the interface
D.
Enable LLDP-MED on the ISP device
Enable LLDP-MED on the ISP device
Refer to the exhibit.
Which change to the configuration on Switch?
allows the two switches to establish an GtherChannel?
A.
Change the protocol to EtherChannel mode on.
B.
Change the LACP mode to active
C.
Change the LACP mode to desirable
D.
Change the protocol to PAqP and use auto mode
Change the LACP mode to active
When deploying syslog, which severity level logs informational message?
A.
0
B.
2
C.
4
D.
6
6
Explanation: https://en.wikipedia.org/wiki/Syslog
Refer to the exhibit.
Based on the LACP neighbor status, in which mode is the SW1 port channel configured?
A.
passive
B.
mode on
C.
auto
D.
active
active
Explanation: From the neighbor status, we notice the “Flags” are SP. “P” here means the
neighbor is in Passive mode.In order to create an Etherchannel interface, the (local) SW1
ports should be in Active mode.Moreover, the “Port State” in the exhibit is “0x3c” (which
equals to “00111100 in binary format).Bit 3 is “1” which means the ports are synchronizing -
> the ports are working so the local ports should be in Active mode.
Which two values or settings must be entered when configuring a new WLAN in the Cisco Wireless LAN Controller GUI? (Choose two)
A.
management interface settings
B.
QoS settings
C.
Ip address of one or more access points
D.
SSID
E.
Profile name
SSID
Profile name
A network engineer must configure the router R1 GigabitEthernet1/1 interface to connect to
the router R2 GigabitEthernet1/1 interface. For the configuration to be applied the engineer
must compress the address 2001:0db8:0000:0000:0500:000a:400F:583B. Which
command must be issued on the interface?
A.
ipv6 address 2001:0db8::5: a: 4F 583B
B.
ipv6 address 2001:db8::500:a:400F:583B
C.
ipv6 address 2001 db8:0::500:a:4F:583B
D.
ipv6 address 2001::db8:0000::500:a:400F:583B
ipv6 address 2001:db8::500:a:400F:583B
With REST API, which standard HTTP header tells a server which media type is expected by the client?
A.
Accept-Encoding: gzip. deflate
B.
Accept-Patch: text/example; charset=utf-8
C.
Content-Type: application/json; charset=utf-8
D.
Accept: application/json
Accept: application/json
Explanation: Accept header is a way for a client to specify the media type of the response content it is expecting and Content-type is a way to specify the media type of request being
sent from the client to the server.
http://www.java-allandsundry.com/2012/08/accept-header-vs-content-typeheader.
html#:~:text=Accept-and-Content%2Dtype-are,the-client-to-t
he-server
Refer to the exhibit.
Which action is expected from SW1 when the untagged frame is received on the
GigabitEthernet0/1 interface?
A.
The frame is processed in VLAN 5.
B.
The frame is processed in VLAN 11
C.
The frame is processed in VLAN 1
D.
The frame is dropped
The frame is processed in VLAN 5.
Refer to the exhibit.
Shortly after SiteA was connected to SiteB over a new single-mode fiber path users at
SiteA report intermittent connectivity issues with applications hosted at SiteB What is the
cause of the intermittent connectivity issue?
A.
Interface errors are incrementing
B.
An incorrect SFP media type was used at SiteA
C.
High usage is causing high latency
D.
The sites were connected with the wrong cable type
Interface errors are incrementing
Drag and drop to the characteristics of networking from the left onto the correct networking types on the right.
Refer to the exhibit.
Which command configures a floating static route to provide a backup to the primary link?
A.
ip route 0.0.0.0 0.0.0.0 209.165.202.131
B.
ip route 209.165.201.0 255.255.255.224 209.165.202.130
C.
ip route 0.0.0.0 0.0.0.0 209.165.200.224
D.
ip route 209.165.200.224 255.255.255.224 209.165.202.129 254
ip route 209.165.200.224 255.255.255.224 209.165.202.129 254
What are two benefits of FHRPs? (Choose two.)
A.
They prevent loops in the Layer 2 network.
B.
They allow encrypted traffic.
C.
They are able to bundle muftlple ports to increase bandwidth
D.
They enable automatic failover of the default gateway.
E.
They allow multiple devices lo serve as a single virtual gateway for clients in the network
They enable automatic failover of the default gateway.
They allow multiple devices lo serve as a single virtual gateway for clients in the network
| Page 32 out of 72 Pages |
| Previous |